名稱：甲烷毛細管柱

編號：20220719007

規格：30m*0.53mm*25um

型號：HH-PLOT Molecular sieve

使用溫度：250°C

應用：HJ-2017環境空氣/固定污染源廢氣中總烴，甲烷，非甲烷總烴的測定 氣相色譜法

總烴，指所有的碳氫化合物及其衍生物，對環境空氣造成污染的主要是常溫下為氣態及液態但具有較大揮發性的部分。非甲烷總烴通常是指除甲烷以外的所有可揮發的碳氫化合物及其衍生物(其中主要是c2?c8)。在實驗條件下，用氫火焰離子化檢測器(fid)所測得的氣態碳氫化合物及其雜原子取代化合物的總量，減去甲烷部分的含量，即為非甲烷總烴。非甲烷總烴濃度高，一般說明空氣或者廢氣中有機污染物含量高，除直接對人體健康有害外，在一定條件下大氣中的烴類與氮氧化物經日光照射產生一系列光化學反應而形成光化學煙霧，對環境和人類都造成進一步危害。因此大氣污染物綜合排放標準中明確規定了非甲烷總烴的高允許排放濃度、高允許排放速率和無組織排放限值。
非甲烷總烴測定的公認方法是分別測定總烴和甲烷含量，然后兩者相減得到非甲烷總烴含量。對于總烴測定，通常將樣品氣以固定流速連續流入fid檢測器，或利用載氣(零氣)將固定體積的樣品氣帶入fid檢測器，這是總烴測定的標準方法。

定量分析非甲烷總烴的毛細管柱  測試譜圖：


Capillary column for quantitative analysis of non-methane total hydrocarbons
Capillary column for quantitative analysis of total non-methane hydrocarbons Details:

Name: Methane capillary column

Number: 20220719007

Specifications: 30m*0.53mm*25um

Model: HH-PLOT Molecular sieve

Operating temperature: 250°C

Application: HJ-2017 Determination of total hydrocarbons, methane, and non-methane total hydrocarbons in ambient air/stationary pollution source waste gas by gas chromatography

Total hydrocarbons refer to all hydrocarbons and their derivatives. The main pollutants to ambient air are the gaseous and liquid but highly volatile parts at room temperature. Non-methane total hydrocarbons generally refer to all volatile hydrocarbons and their derivatives (mainly c2-c8) except methane. Under the experimental conditions, the total amount of gaseous hydrocarbons and their heteroatom-substituted compounds measured by a hydrogen flame ionization detector (fid), minus the content of the methane part, is the total non-methane hydrocarbons. The high concentration of non-methane total hydrocarbons generally means that the content of organic pollutants in the air or exhaust gas is high. In addition to being directly harmful to human health, under certain conditions, hydrocarbons and nitrogen oxides in the atmosphere are formed by a series of photochemical reactions through sunlight irradiation. Photochemical smog further harms the environment and humans. Therefore, the comprehensive emission standard of air pollutants clearly stipulates the maximum allowable emission concentration, maximum allowable emission rate and fugitive emission limit of non-methane total hydrocarbons.
The accepted method for the determination of total non-methane hydrocarbons is to measure the total hydrocarbons and methane content separately, and then subtract the two to obtain the total non-methane hydrocarbon content. For total hydrocarbon determination, the sample gas is usually continuously flowed into the fid detector at a fixed flow rate, or a fixed volume of sample gas is brought into the fid detector using a carrier gas (zero gas), which is the standard method for total hydrocarbon determination.

Capillary column test spectrum for quantitative analysis of non-methane total hydrocarbons: