TCEP 毛細管柱測定工業甲苯
簡單介紹
毛細管柱測定工業甲苯,液化石油氣,二甲醚,甲縮醛,乙縮醛,乙醇,室內空氣,焦爐煤氣,煉廠氣,天然氣,變壓器油,多氯聯苯,植物油,6號溶劑殘留,裂解進樣器,乙縮醛,乙酸
TCEP 毛細管柱測定工業甲苯的詳細介紹
毛細管柱測定工業甲苯
毛細管柱測定工業甲苯 詳細信息:
名稱:毛細管柱
固定相:非鍵合;1,2,3-三(2-氰乙氧基)丙烷
規格:50m*0.25mm*0.4um
型號:TCEP
使用溫度:低于室溫~145°C
應用: ASTM D6526-2010毛細管柱氣相色譜法進行甲苯分析的標準試驗方法
毛細管柱測定工業甲苯 測試譜圖:
Capillary Column Determination of Industrial Toluene
Capillary column determination of industrial toluene
Strong polarity; 1,2,3-tris(2-cyanoethoxy)propane--non-bonded
It is very suitable for the analysis and detection of aromatic hydrocarbons and oxygenated compounds in gasoline.
Temperature range: 0℃ ~150℃
Most gasoline co ntains aliphatic hydrocarbons to n-dodecane (C12). In order to better identify aromatics and oxygenated compounds, it is necessary to elute benzene after C11 and toluene after C12.
The highly polar TCEP statio nary phase provides a benzene retention index greater than 1100, and allows alcohols and aromatics to be separated from aliphatic compounds in gasoline.
Name: Capillary Column
Statio nary phase: non-bonded; 1,2,3-tris(2-cyanoethoxy)propane
Specification: 50m*0.25mm*0.4um
Model: TCEP
Operating temperature: below room temperature ~145°C
Application: ASTM D6526-2010 Standard Test Method for Toluene Analysis by Capillary Column Gas Chromatography
Capillary column determination of industrial toluene Test spectrum:
毛細管柱測定工業甲苯 詳細信息:
強性;1,2,3-三(2-氰基乙氧基)丙烷--非鍵合
非常適用于汽油中芳烴和含氧化合物的分析檢測.
溫度范圍: 0℃ ~150℃
大部分汽油含有脂肪烴到正十二烷(C12)。為了好地識別芳烴和含氧化合物,洗脫C11之后的苯和C12之后的甲苯是必要地。
強性的TCEP固定相提供了一個大于1100的苯保留指數,并允許醇、芳烴從汽油中的脂肪族化合物分離出。
名稱:毛細管柱
固定相:非鍵合;1,2,3-三(2-氰乙氧基)丙烷
規格:50m*0.25mm*0.4um
型號:TCEP
使用溫度:低于室溫~145°C
應用: ASTM D6526-2010毛細管柱氣相色譜法進行甲苯分析的標準試驗方法
毛細管柱測定工業甲苯 測試譜圖:
Capillary Column Determination of Industrial Toluene
Capillary column determination of industrial toluene
Strong polarity; 1,2,3-tris(2-cyanoethoxy)propane--non-bonded
It is very suitable for the analysis and detection of aromatic hydrocarbons and oxygenated compounds in gasoline.
Temperature range: 0℃ ~150℃
Most gasoline co
The highly polar TCEP statio
Name: Capillary Column
Statio
Specification: 50m*0.25mm*0.4um
Model: TCEP
Operating temperature: below room temperature ~145°C
Application: ASTM D6526-2010 Standard Test Method for Toluene Analysis by Capillary Column Gas Chromatography
Capillary column determination of industrial toluene Test spectrum:
相關產品
在線留言 |